cleaning
GET special cleaning tablets
GET special cleaning tablets are available in many different grammages. Depending on the manufacturer, the tablet sizes vary. Only use 1 cleaning tablet per cleaning operation.
Application examples:
- Automatic coffee machine with automatic cleaning program:
Use 1 cleaning tablet per cleaning procedure. Start the cleaning program, insert the cleaning tablet into the intended powder compartment, follow the instructions of the appliance / operating instructions. - Fully automatic coffee machine without auotmatic cleaning program:
Press the key for powder coffee preparation and select the largest possible cup size, then the rest of the tablet falls into the set container / pomace, repeat the process until the cleaning tablet Is fully resolved. Repeat this process for rinsing the brewing unit without cleaning. - Thermos:
Fill the thermos flask with hot water (approx. 70 ° C) and insert 1 cleaning tablet. Leave in for approx. 20 minutes. Then rinse with clear water. Repeat the procedure if the dirt is heavy. As an alternative to the cleaning tablet, the GET special cleaning powder can also be used in this case.
Be sure to observe the operating instructions of the appliance manufacturer.
Ingredients:
Phosphates, soda, oxidizing agents, bleach activators
GET Special milk foam cleaner
Application example:
- 20ml milk foam cleaner on 250ml water. Rinse well with clean water after cleaning.
The dosage may vary depending on the contamination of the milk-carrying parts
Be sure to observe the operating instructions of the appliance manufacturer.
Ingredients:
5% nonionic surfactants, 5-15% phosphates, organic and inorganic acids, colorants and auxiliaries
GET Special Cleaning Powder
Application examples:
- Brewing group cleaning: Heat the machine, add 1 scoop of powder into the blind and carry out the cleaning according to the instructions of the machine manufacturer. Then rinse the sieve carrier and blind screen and repeat the procedure with clear water at least twice.
- Cleaning the sieves: Add 1-2 tablespoons of powder in 500ml of boiling water, depending on the contamination. Sieves and sieve carriers (without plastic handles) should be applied for approx. 15-30 minutes, then rinse thoroughly with clear water. Please observe the cleaning instructions of the appliance manufacturer.
- The dosage may vary depending on the contamination of the brewing group / sieves. In the case of heavy soiling, the process may have to be repeated.
Be sure to observe the operating instructions of the appliance manufacturer.
Ingredients:
Phosphates, soda, oxidizing agents, bleach activators
Irritating to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Do not breathe dust. Store in a cool, dry place.